Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 639)

RSView32 commands

A–19
the connection is established, RSView32 waits the
specified time and, if another command is received to
export data, the command is executed and the wait
timer is reset. If no command is received within the
wait time, the connection is closed.
[/Uuser_name] A user ID that is valid on the data source.
[/Ppassword] A password that is valid on the data source.
AlarmOff AlarmOff
Stops alarm monitoring. Once this command has run, it displays a
message indicating that alarm monitoring has stopped.
AlarmOn AlarmOn [/H]
Starts alarm monitoring. Once this command has run, it displays a
message indicating that alarm monitoring has started.
[/H] Turns on handshaking the moment alarm monitoring
starts and sets the handshake bit for any tags in alarm
at that moment.
To have alarming start when a project starts, open the Startup editor
and click the Alarming check box.
AlarmPrintOff AlarmPrintOff
Stops alarms from printing.
AlarmPrintOn AlarmPrintOn
Starts alarm printing.
Alarm printing is on by default.
AlarmViewer AlarmViewer
Opens the Alarm Log Viewer.