Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 667)

RSView32 commands

A–47
[/U] Initiates an update of tag values in all input fields
before starting to print. This parameter is not
necessary with input fields that are updated
continuously.
[/Pfile] Specifies the name of a parameter file that contains
tag names to be substituted for placeholders in the
display.
[/Ttag_name] Specifies one or more tag names to be substituted for
placeholders in the display. Separate multiple tag
names with commas; do not use spaces.
If the specified display is not currently visible, RSView32 prints the
display without making it visible. If this command is issued without
specifying a display, and no display has focus, RSView32 logs an error
to the activity log.
PrintDisplay prints the entire runtime display, even if parts are covered
by other displays. However, PrintDisplay does not necessarily print
ActiveX or OLE objects in their runtime state.
The ScreenPrint command prints an image of whatever shows on the
monitor. Use ScreenPrint to ensure that the display is printed showing
all objects in their current, runtime state (provided they are not
covered by other displays).
If you issue the PrintDisplay command when RSView32 is in Edit
mode, RSView32 sends the last-saved version of the display file to the
printer. Any changes you make after saving the display are not
reflected in the printout. To ensure the printout is up-to-date, save the
display before printing it.
Project
Project
Obsolete. Use ProjectHide, ProjectRun, ProjectShow, or ProjectStop.