Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 656)

A–36

RSView32 User’s Guide
FTDataWrite
Disable
FTDataWriteDisable
Stops FactoryTalk Clients from writing values to RSView32 tags. This
command has no parameters.
FTDataWrite
Enable
FTDataWriteEnable
Allows FactoryTalk clients to write values to RSView32 tags. This
command has no parameters.
Graphic
Graphic [file]
In edit mode, without the parameter, opens the Graphic Display
editor; with the parameter, opens the specified graphic display file.
[file] The name of a graphic file without a file extension.
HandshakeOff HandshakeOff
Disables alarm handshaking, regardless of whether the individual
handshake bits are configured. This command gives no indication that
it has run but will display an error message if not executed properly.
HandshakeOn HandshakeOn
Enables alarm handshaking. By default this setting is off. Handshaking
can be disabled with the HandshakeOff command. This command
gives no indication that it has run but will display a message if not
executed properly.
This command will not set the handshake bit for any tag already in
alarm when the command is executed.
IMPORTANT