Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 273)

9–6

RSView32 User’s Guide
Editing events
You can edit events during development or when you run the project
using RSView32 Works.
1. Open the event file you want to edit.
2. Use the Prev and Next buttons to move among events. Make the
required changes.
3. Save the changes.
If you change the event file while running the project, the changes
won’t take effect until you stop running the file and then restart it.
Starting and stopping event processing
There are many ways to start and stop event processing. Choose the
way that works best for your project.
For a complete list of RSView32 commands and their command
syntax, see Appendix A, RSView32 commands, or see Help.
Ways to start event processing
In the Startup editor, select the Event Detector check box and
specify an event file.
In the Macro editor, create a startup or login macro that includes
the EventOn <file> command.
In the Graphic Display editor, specify the EventOn <file>
command in the Startup field of the Display Settings dialog box.
In the Graphic Display editor, create a button object and specify
the EventOn <file> command as the press action. When the
button is pressed, event detection starts.