Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 680)

A–60

RSView32 User’s Guide
Undefine Undefine
Deletes a symbol definition that was created using the Define
command.
Example: The Undefine command
Undefine test
Deletes the definition for the symbol “test” that was previously
created with the Define command.
Undefine *
Deletes all symbol definitions.
See also Define.
Upload Upload
In a graphic display, reads a value from the programmable controller
or server and displays it in the selected input field.
This command operates on the active graphic display. If no display is
active, this command is ignored.
Ctrl–PgUp also uploads the value to the selected input field.
UploadAll UploadAll
In a graphic display, reads values from the programmable controller or
server and displays them in all the input fields.
This command operates on the active graphic display. If no display is
active, this command is ignored.
PgUp also uploads all the values to the input fields.