Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 282)

10–8

RSView32 User’s Guide
objects configured with touch animation
Alarm Identification field in the Tag Database editor
By default, strict security is on. For most projects, strict security is
desirable.
Turning off strict security
If you turn off strict security, security access to graphic displays, OLE
verbs, and tags is still checked. As well, commands issued from the
command line are checked. However, the system does not check
security access to commands issued from components other than the
command line. For example, if strict security is off, commands issued
from a graphic display are not checked for security access.
To turn off strict security:
1. Open the Security Codes editor.
2. On the menu bar, click Setup, and then click Strict Security.
3. Clear the check box.
4. Click OK.
Strict security always applies to graphic displays, OLE verbs, and
tags. If you assign security to any of these items, their security is
always checked. IMPORTANT
If you do NOT want strict security, clear this check box.
If you do NOT want strict security, clear this check box.