Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 436)

Animating graphic objects

12–29
To configure touch animation:
1. Select the object.
2. Click the Touch tab in the Animation dialog box.
3. In the Press Action field, type an RSView32 command or a macro.
Separate multiple commands or macros with a semi–colon (;) or
place them on separate lines. Multiple commands are executed in
the order they are listed.
If you want repeat and release actions, type commands or macros
in these fields as well. Press and release actions occur when the
object is pressed or released. Repeat actions occur at the rate
specified in the Repeat Rate field and do not wait for the press
command to be completed.
4. If you specified a repeat action, specify a repeat rate. This is how
often the action will be repeated while the object is pressed.
5. Click Apply.