Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 48)

2–8

RSView32 User’s Guide
3. Select a channel and fill in the following information:
Network Type
Using the following table as a guide, select a network type:
To Select
Communicate with programmable controllers on a
ControlNet network ControlNet
Communicate with programmable controllers on local
or remote DH networks DH
Communicate with programmable controllers on local
or remote DH+
™ networks
or
Communicate with SLC ™ controllers on remote DH–
485 networks
or
Connect to Channel 0 of an Enhanced PLC
DH+
Communicate with SLC controllers on local DH–485
networks
or
Connect to an SLC with an RS–232 port
DH–485
Communicate with Ethernet ® programmable
controllers directly connected to the TCP/IP network
or
Communicate with SoftLogix 5 controllers
or
Communicate with SLC 5/05 controllers
TCP/IP