Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 682)


B–1
Appendix B
System tags
System tags are preconfigured tags created by RSView32 ™ . Use system
tags for read–only applications in your project.
Alarms
The following tags display alarm information:
Tag Name Type Displays information about
system\AlarmBanner String The most recent, most severe alarm. If an
alarm of an equal or higher severity occurs,
it replaces the first alarm, even if the
previous alarm has not been acknowledged.
system\AlarmMostRecentDate String The date of the most recent, most severe
alarm.
system\AlarmMostRecentLabel String The threshold label of the tag of the most
recent, most severe alarm.
system\AlarmMostRecentSeverity Analog The severity of the most recent, most
severe alarm.
system\AlarmMostRecentTagDesc String The description of the tag of the most
recent, most severe alarm.
system\AlarmMostRecentTagname String The name of the tag of the most recent,
most severe alarm.
system\AlarmMostRecentTime String The time of the most recent, most severe
alarm.
system\AlarmMostRecentUnits String The units of the most recent, most severe
alarm.
system\AlarmStatus String The number of unacknowledged and
suppressed alarms.