Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 611)

Running your project

18–7
Communication Status
Logs communication errors to the activity log file and/or the
activity bar if you set the project up to do this. To set this up, open
the Activity Log Setup editor and ensure the Log File and Activity
Bar check boxes are selected for the Communications category.
OPC/DDE Server
Enables RSView32 as an OPC ® and DDE server. This is the same
as using the RTDataServerOn command.
Data Logging
Starts running the specified data log model. This is the same as
using the DataLogOn command. Up to 20 data log model files can
run simultaneously, but only one can be specified in the Startup
editor. To run more files, list them in a startup macro.
Global Key File
Runs the specified global key file. This is the same as using the Key
<file> command.
Derived Tags
Runs the specified derived tags file. This is the same as using the
DerivedOn <file> command. Up to 20 derived tag files can run
simultaneously, but only one can be specified in the Startup editor.
To run more files, list them in a startup macro.
Event Detector
Runs the specified event file. This is the same as using the
EventOn <file> command. Up to 20 event files can run
simultaneously, but only one file can be specified in the Startup
editor. To run more files, list them in a startup macro.
Startup Macro
Runs the specified macro. A startup macro allows you to run a
series of commands when the project starts. Any macro can be
used as a startup macro.