Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 677)

RSView32 commands

A–57
Set Valve\23 open
Valve\23 is a digital tag with its on label configured as open. This
command uses the on label for the tag to write the value “1” to the
programmable controller or server.
Set Hopper1\Level Preset
Hopper1\Level is a tag and Preset is a tag with a value of “90.” This
command writes “90” to the programmable controller or server.
Set String\string1 “open”
String\string1 is a string tag. This command writes “open” to the
programmable controller or server.
SetFocus SetFocus
Sets the focus to a particular graphic display.
<file> The name of a graphic display file without a file
extension.
Silence Silence
If the alarm for the specified tag is configured to use the internal bell,
this command silences the computer’s sound.
If the alarm for the specified tag is configured to use the external bell,
this command resets the tag associated with the external bell and
silences the associated audio device.
<tag_name> The name of a tag that is in alarm. You can use
wildcards.
SilenceAll SilenceAll
Silences the internal and external bells for all tags in alarm.
Using this command is faster than using the Silence command with
the asterisk (*) wildcard.