Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 307)

11–14

RSView32 User’s Guide
These options are described in the sections that follow.
Specifying the display type
Replace
Replace is the default display type. Use this option if you want the
graphic display to replace other open graphic displays when it opens.
RSView32
™ will close any graphic display that the newly opened
display overlaps. This way you don’t need to issue separate commands
to close the other displays.
Overlay
Use this option if the graphic display doesn’t need to replace others or
appear on top. The display will layer with other displays, overlapping
some and being overlapped by others as the focus changes between
multiple displays.
Overlay displays will always appear behind On Top displays, and will
be replaced by Replace displays. Use Overlay with care, as keeping
multiple displays open can affect system performance adversely.
Keep at Back
Check this box if you always want this graphic display at the back.
However, we recommend that you use the On Top display type to
control the layering of displays. Note that you must choose the
Overlay option to use Keep at Back.
On Top
Use this option to keep the graphic display on top at all times. It will
remain on top even if another display has focus. However, if more