Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 642)

A–22

RSView32 User’s Guide
ComStatusOn ComStatusOn
Starts logging of communication errors if RSView32 is set up to do so.
To log communication errors, ensure the Communications category is
selected in the Activity Log Setup editor.
To have error logging automatically start when a project starts, open
the Startup editor and click the Communication Status check box.
Database Database
Opens the Tag Database editor.
DatabaseSync DatabaseSync
Makes RSView32 convert the tag database into binary format the next
time the project opens. Use this command if you change the tag
database that a project uses (using the Project Paths dialog box), after
changing a node’s data source, or after changing a direct driver’s device
type.
To synchronize the tag database:
1. On the command line type
DatabaseSync
, and then press Enter.
2. Close the project.
3. Open the project. The database will be synchronized as the project
opens.
DataLog DataLog [file]
Without the parameter, opens the Data Log Setup editor. With the
parameter, opens the specified data log file.
[file] The name of a data log model you want to edit in the
Data Log Setup editor. If you don’t specify a file
name, the editor opens so you can create a new
model file.