Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 557)

Setting up navigation

15–17
Reserved keys
The following keys and key combinations are normally reserved for
use by Windows
® and RSView32.
This reserved key Does this
+ on the numeric keypad Displays the Recipe dialog box, or saves the recipe if Ctrl-W was pressed
previously, or restores the recipe if Ctrl-R was pressed previously.
Enter If Enter is pressed when a button has focus, the button’s press and
release actions are executed.
If Enter is pressed when an input field has focus, the field’s value is
downloaded to the PLC. If the input field is configured to display the on–
screen keyboard, pressing Enter displays the on–screen keyboard.
If Enter is pressed when a recipe field has focus, the Recipe dialog box is
displayed. If Ctrl-W was pressed previously, the recipe is saved. If Ctrl-R
was pressed previously, the recipe is restored. If the recipe field is
configured to display the on–screen keyboard, pressing Enter displays the
on–screen keyboard.
Tab Moves focus to the object with the next highest index number.
Shift–Tab Moves focus to the object with the next lowest index number.
Ctrl–Up Arrow,
Ctrl–Left Arrow,
Ctrl–Down Arrow,
Ctrl–Right Arrow Moves focus to an object in the direction in which the arrow points.
PgUp Uploads data into all input fields.
Ctrl–PgUp Uploads data into the selected input field.
PgDn Downloads data from all input fields.
Ctrl–PgDn Downloads data from the selected input field.
Ctrl–R Sets input focus to the recipe object, and prepares for a recipe restore.
Ctrl–W Sets input focus to the recipe object, and prepares for a recipe save.
Up Arrow,
Down Arrow Moves the selection bar on the Object Key menu.