Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 280)

10–6

RSView32 User’s Guide
Setting up security by inclusion
Security by inclusion means all RSView32 commands and all macros
requiring security are listed in the Security Codes editor.
1. For Default, leave the security code as *.
2. In the Command field, type the command or macro you want to
assign security to.
If you assign security to the Login and Logout commands, be sure
to give all users, including Default, access to these commands.
Otherwise, users might be locked in or out of the system. It is
recommended that Login and Logout keep the * security code.
3. In the Security Code field, select a code for the command or
macro.
4. If you like, type a descriptive remark in the Description field.
5. Repeat steps 2 through 4 for each command and macro.
6. Save the configuration by choosing Close.
Setting up security by exclusion
Security by exclusion means only the RSView32 commands and
macros you want users who are assigned this code to have access to
are listed in the Security Codes editor.
1. For Default, change the security code to any letter.
2. In the Command field, type a command or macro you want users
who are assigned this code to have access to.
Ensure you include the Login and Logout commands and assign
them the * security code.
3. In the Security Code field, select a code for the command or
macro.