Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 653)

RSView32 commands

A–33
Download Download
Writes the value in the selected input field of the active graphic display
to the programmable controller or server.
This command operates on the active graphic display. If no display is
active, this command is ignored.
Ctrl–PgDn also downloads the value in the selected input field.
The Enter key also downloads the value in the selected input field.
However, if the /E parameter is used with the Display command, the
Enter key is disabled, unless the Display On-Screen Keyboard option
is selected (in the Behavior tab of the Display Settings dialog box). If
the selected input field is a recipe field, pressing the Enter key opens
the Recipe dialog box.
DownloadAll
DownloadAll
Writes the values in all input fields of the active graphic display to the
programmable controller or server.
This command operates on the active graphic display. If no display is
active, this command is ignored.
PgDn also downloads all the values in the input fields.
DriverPrimary DriverPrimary
Switches from the secondary driver to the primary driver on the
specified channel.
<channel> The number of the channel (1 through 4) that is
being switched from its secondary to primary driver.