Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 240)

7–40

RSView32 User’s Guide
Choosing the data to log
For narrow–format dBASE IV models and ODBC models, the model
can contain up to 10,000 tags. For wide–format dBASE IV models,
the model can contain up to 100 tags.
To specify tags:
1. In the Data Log Setup editor, click the Tags in Model tab.
2. In the Tag(s) to Add field, specify the tags that will be logged by:
typing the tag names, separating multiple tag names by a space
or a comma
using the selection button to open the Tag Browser and then
selecting tags. To select multiple tags, Shift–click to select
groups of tags or Ctrl–click to select individual tags.
3. Click the Add button. The tags listed in the Tag(s) to Add field
appear in the Tags in Model field.
To remove a tag from the Tags in Model field, click a tag, and then
click Remove. To remove multiple tags, Shift–click the tags and