Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 634)

A–14

RSView32 User’s Guide
ActivityOn ActivityOn
Starts activity logging.
Activity logging is on by default.
ActivityPrintOff ActivityPrintOff
Turns off the printing of activity logging. By default, activity log
printing is turned on when you start an RSView32 project.
ActivityPrintOn ActivityPrintOn
Turns on the printing of activity logging if it has been turned off by
the ActivityPrintOff command. By default, activity log printing is
turned on when you start an RSView32 project.
ActivityViewer ActivityViewer
Opens the Activity Log Viewer.
Alarm Alarm
Opens the Alarm Setup editor.
AlarmEvent
AlarmEvent [TagType]
[/VTagValue] [/SSeverity] [/H“Timestamp”] [/L“LogMessage”]
Creates an alarm event. Alarm events are not processed unless the
AlarmOn command is issued, and alarm events stop being processed
when the AlarmOff command is issued.
You cannot specify the threshold for an alarm.
<EventName> The name of the alarm event, up to 255 characters
long. The event name must follow the syntax of a tag
name, and can, but need not, be a tag name in the tag
database. The alarm event name cannot be the name
of an alarm tag.