Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 683)

B–2

RSView32 User’s Guide
Communications
The following tags record device communication information. These
tags are added to the system folder when you configure a channel in
the Channel editor. Each channel you configure will have these four
tags. The number on the end identifies the tags for each channel. For
example, system\ComErrorString1 is for channel 1.
To report communication errors, issue the ComStatusOn command.
system\AlarmSummaryItems Analog The number of alarm transactions in an
unfiltered alarm summary.
system\AlarmSummaryItemsUnacked Analog The number of unacknowledged alarms in
an unfiltered alarm summary.
system\AlarmSuppressedCount Analog The number of tags with alarm suppression
turned on.
Tag Name Type Displays information about
Tag Name Type Displays information about
system\ComErrorString1 String Most recent device error message.
system\ComErrorValue1 Analog Internal number of most recent device error.
system\ComStatusString1 String Current status of device communications. Will be the
same as system\ComErrorString1 if the error
condition still exists.
system\ComStatusValue1 Analog Internal number indicating current status of device
communications. Will be the same as
system\ComErrorValue1 if the error condition still
exists.