Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 662)

A–42

RSView32 User’s Guide
Monitor Monitor [file][/Xnnn] [/Ynnn][/Ttag_name]
In edit mode, without the [file] parameter, opens the Tag Monitor
editor; with the [file] parameter, opens the specified tag monitor file.
In run mode, with the [file] parameter, opens the specified tag monitor
file. With the [/Ttag_name] parameter, opens a tag monitor containing
the specified tags.
[file] The name of a tag monitor file without a file
extension.
[/Xnnn] Positions the tag monitor nnn pixels from the left
edge of the screen. The width depends on screen
resolution.
[/Ynnn] Positions the tag monitor nnn pixels from the top
edge of the screen. The height depends on screen
resolution.
[/Ttag_name] The name of a tag. You can use wildcards and can
name more than one tag. Precede each tag name with
a space and /T.
You can monitor up to 100 tags in one file.
Examples: The Monitor command
Monitor /THopper1\Flow
Opens a tag monitor displaying the tag Hopper1\Flow.
Monitor /THopper1\Flow /THopper\Temp
Opens a tag monitor displaying the tags Hopper1\Flow and
Hopper\Temp.
Monitor /T*
Displays information on the first 100 tags in the tag database.
Monitor /THopper*\Divider
Displays information on the first 100 tags called Divider from all
folders beginning with Hopper.