Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 480)

Configuring trends

13–9
Example: Relative Time
To display data starting 90 minutes from the oldest data in the log
model, type:
To specify absolute time:
Absolute time is specified by the month, day, year, hour, minute, and
second. For an absolute start time, type:
MMM DD YYYY hh:mm:ss where:
MMM is month
DD is day
YYYY is year
hh:mm:ss is hours, minutes, seconds
Time Range
The time range determines the time span on the time axis. Together,
the start time and time range determine how many points are plotted
on the time axis.
Specify the time range as a whole number followed by a unit. Valid
units are: Sec, Min, Hour, Day, Week.