Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 316)

Creating graphic displays

11–23
Specifying startup and shutdown commands
To run RSView32 commands or macros each time this graphic display
starts or stops, specify the commands or macros. The startup
command runs before the graphic opens so commands such as
UploadAll or RecipeRestore will not work in a startup macro. The
shutdown command runs after the display closes, so commands such
as DownloadAll or RecipeSave will not work in a shutdown macro.
If you use the Always Updating option with the Cache After
Displaying option, the startup command is executed when the display
is loaded into the cache. The shutdown command is executed only
when the cache is flushed (using the FlushCache command) or when
you stop the project. If you do not use the Always Updating option,
the startup and shutdown commands work as described in the
previous paragraph.
For a complete list of RSView32 commands, see Appendix A,
RSView32 commands, or see Help.
Type commands or macros in the Startup
and Shutdown fields, or click the ... but-
tons to open the Command Wizard and
select the commands or macros.