Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 561)

Setting up navigation

15–21
Some keys are reserved for use by Windows and RSView32.
Reserved keys do not appear in the Key field in the Add Key dialog
box.
5. Click OK.
The key you add is displayed in the Key field. If you specified a
modifier, the first letter of that modifier is also displayed. If you
create a label in the next step, it will also be listed in this field. As
you continue to add keys, they will be listed here.
6. In the Label field, if you want, type a label for the key.
7. In the Press Action field and, if desired, in the Release Action field,
specify an RSView32 command or a macro by typing it or by
clicking the ... button to open the Command Wizard and choose it.
The command or macro is the action that will occur when the key
is pressed or released. You can type multiple commands or macros.
If you do, separate them with a semi–colon (;) or type them on
separate lines.
8. If you want an action to repeat while the key is held down, type the
RSView32 command or macro name in the Repeat Action field.
The repeat action repeats at the rate specified in the Keyboard
properties of the Windows Control Panel.
9. Click OK to save the global key file.