Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 168)

6–42

RSView32 User’s Guide
To open the Tag Database editor:
1. In the Project Manager, open the System folder.
2. Open the Tag Database editor by doing one of the following:
double–click the Tag Database icon
right–click the Tag Database icon and then click Show
When can I configure an alarm for a tag?
You can configure an alarm for a tag at the time you create the tag or
later.
To configure an alarm for an existing tag, select the tag in the Tag
Database spreadsheet, and then click the Alarm check box. Click the
Alarm button to open the Analog Alarm or Digital Alarm dialog box.
To add an
alarm to a
tag, select
this check
box.
When a tag
has an
alarm, an X
appears in
this column.