Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 111)

Creating tags

4–31
Creating a tag monitor file
1. In the Project Manager, open the System folder.
2. Open the Tag Monitor editor by doing one of the following:
double–click the Tag Monitor icon
right–click the Tag Monitor icon and then click New
3. On the View menu, click Form to display both the form and the
spreadsheet.
4. Select the tags you want to display as described below.
5. On the File menu, click Save, and then type a name for the file.
Selecting tags
To select tags, the form part of the tag monitor must be visible. If it is
not visible, click Form on the View menu.
To select the tags you want to display, do one of the following: 6.
type a tag name in the Tag Name field
click to open a list and then select a tag
type a wildcard in the Name field, and then press Enter or click
OK. The wildcards are:
This
character
Does this
? Matches any single character.
* Matches any number of characters, including the
backslash (\) character.
Use this wildcard by itself to display all the tags in
the tag database.