Chapter 5, Configuring the at-cv5m02 management card – Allied Telesis AT-S102 User Manual
Page 99
99
Chapter 5
Configuring the AT-CV5M02
Management Card
This chapter has the following sections:
“Assigning an IP Address Configuration” on page 100
“Assigning a Name” on page 104
“Assigning Contact and Location Information” on page 106
“Configuring the SNMP Community Strings” on page 108
“Specifying the IP Addresses of the SNMP Trap Receivers” on
page 110
“Configuring the Management Security” on page 111
“Enabling or Disabling the Web Server” on page 114
“Manually Setting the Date and Time” on page 115
“Configuring the Network Time Protocol Client” on page 117
“Resetting the Management Card” on page 119
“Viewing the Event Log” on page 122
“Viewing the Activity Monitor” on page 130
“Configuring the Syslog Client” on page 131
“Configuring the 10/100Base-TX Port” on page 133
“Restoring the Default Setting on the 10/100Base-TX Port” on
page 138
“Restoring the Default Values on the AT-CV5M02 Management Card”
on page 140
“Configuring the Temperature Threshold” on page 142
“Activating a Standby AT-CV5M02 Management Card” on page 144
“Setting the Baud Rate of the Console Port” on page 146
“Displaying the Operational Status of the Chassis” on page 148
“Pinging Network Devices” on page 152
“Displaying the Inter-process Communication Monitor” on page 153
“Displaying Information about the Management Card” on page 155