Allied Telesis AT-S102 - Manual (Page 85)

Converteon Management Software User’s Guide
85
What to Configure First on the AT-CV5M02 Management Card
This section has a few suggestions on what to configure during your initial
management session of the management card. The first management
session has to be a local session from the Console port on the card. For
instructions on how to start a local management session, refer to “Starting
a Local Management Session” on page 72.
Changing the
Manager and
Operator
Passwords
Since the default passwords for the manager and operator accounts on
the management card are included in this guide, you should change them
to protect the unit from unauthorized access.
To change the passwords:
1. From the Main Menu, select Configuration.
2. From the Configuration Menu, select System Configuration.
3. From the System Configuration Menu, select System Parameters
Configuration.
4. From the System Parameters Configuration menu, select Omega
Options to display the Omega Options Menu
5. In the Omega Options Menu, select Manager Password to change
the Manager password or Operator Password to change the
Operator password.
6. Enter a new password of 0 to 16 alphanumeric characters. A password
is case-sensitive and can consist of the letters A to Z in uppercase and
lowercase, and the numbers 1 to 9. Do not use special characters such
as spaces, asterisks (*), or exclamation points (!) in a password. To
delete the current password without assigning a new password, enter
a space in the password field. The default passwords are “friend” for
the manager account and “operator” for the operator account.
For information on the other options in the Omega Options Menu, refer
to “Configuring the Management Security” on page 111.
7. Return to the Main Menu.