Saving your changes – Allied Telesis AT-S102 User Manual
Page 89
Converteon Management Software User’s Guide
89
Saving Your
Changes
This completes the initial configuration of the management card. To save
your changes in the permanent master configuration file in flash memory
on the card:
1. From the Main Menu, select Configuration.
2. From the Configuration Menu, select System Configuration.
3. From the System Configuration menu, select Save System
Configuration.
The following message is displayed:
Saving system configuration ... Please Wait
After updating its master configuration file, the management card
changes the message to:
Saving system configuration ... Please Wait ... OK
Press any key to continue...
4. Return to the Main Menu.