Allied Telesis AT-S102 - Manual (Page 47)

Converteon Management Software User’s Guide
47
Packet Rate Limiting
You can set packet rate limits on the network traffic on the ports of the
AT-CM2, AT-CM3 and AT-CM70S Line Cards. You might use this feature
to deal with traffic bottlenecks in a network. They can be set on both ports
and for either the ingress or egress traffic. For instructions, refer to
“Configuring the Port Parameters on the AT-CM Line Cards” on page 169.
Setting this feature requires the AT-CV5M02 Management Card.
The AT-CV Line Cards do not support packet rate limits.