Allied Telesis AT-S102 - Manual (Page 303)

Converteon Management Software User’s Guide
303
Configuring the SNMPv3 Notify Table
The SNMPv3 Notify Table is used to create names for sending traps or
inform messages. The entry parameters in the SNMPv3 Notify Table are:
ˆ Notify Name
ˆ Notify Tag
ˆ Notify Type
ˆ Storage Type
The parameters are defined in Table 37 on page 304.
To access the Configure SNMPv3 Notify Table from the menus:
ˆ From the Main Menu, select Configuration -> System Configuration
-> System Parameters Configuration - > SNMPv3 Configurations
-> Configure SNMPv3 Notify Table. The Configure SNMPv3 Notify
Table menu is shown in Figure 132.
Figure 132. Configure SNMPv3 Notify Table Menu
To access the SNMPv3 Notify Table from the web browser windows:
ˆ :Click the Configuration button in the menu bar and then select the
SNMPv3 tab and the Notify Table tab. The tab is shown in Figure 133
on page 304.
Configure SNMPv3 Notify Table
Converteon
Create SNMPv3 Table Entry
Delete SNMPv3 Table Entry
Modify SNMPv3 Table Entry
Display SNMPv3 Table Entry
Return to SNMPv3 Configurations ...
Configure SNMPv3 Notify Table
Converteon
Create SNMPv3 Table Entry
Delete SNMPv3 Table Entry
Modify SNMPv3 Table Entry
Display SNMPv3 Table Entry
Return to SNMPv3 Configurations ...