Allied Telesis AT-S102 - Manual (Page 145)

Converteon Management Software User’s Guide
145
4. To resume managing the chassis, wait twenty to thirty seconds for the
standby card to transition to the active state and, afterwards, start a
new management session.
Note
For explanations of the other two selections in the Management
Card Redundancy menu, refer to “Saving Your Configuration
Changes” on page 78.
Web Browser
To activate the standby management card from the web browser windows:
1. Select Management Card Redundancy from the menu bar to display
the tab in Figure 50.
Figure 50. Management Card Redundancy Tab
2. In the section Switch Over Management Cards, click Select. A
confirmation prompt is displayed.
3. In the confirmation prompt, click Yes and Apply to activate the
standby card or No and Apply to cancel the procedure. If you select
Yes, your management session ends as the active and standby
management cards change states.
4. To resume managing the chassis, wait twenty to thirty seconds for the
standby card to transition to the active state and afterwards start a new
management session.
Note
The two other selections in the Management Card Redundancy tab
are described in “Saving Your Configuration Changes” on page 78.