Figure 83. last saved configuration tab – Allied Telesis AT-S102 User Manual
Page 197
Converteon Management Software User’s Guide
197
Figure 82. Last Saved Configuration Tab
This tab displays the last saved configuration settings for this card. The
settings are obtained from the master configuration file on the
management card. If the card is new to the slot, the settings are from
the previous card installed in the slot. If the fields are empty, the
master configuration file does not have a previous configuration for this
slot or the previous and current line cards of the slot are different
models.
5. To restore the line card to the last saved configuration, click the
Restore to Last Saved Configuration button. The line card will reset
if its current operating mode is different from the last saved
configuration.