Allied Telesis AT-S102 - Manual (Page 181)

Converteon Management Software User’s Guide
181
Assigning Names to the AT-CM Line Cards
Menus
To assign names to the AT-CM Line Cards from the menus:
1. From the Main Menu, select Module Status and Configuration to
display the Module Status and Configuration menu shown in Figure 58
on page 158.
2. From the Module Status and Configuration menu, select the line card
you want to name. You can configure only one line card at a time. The
Module Configuration Menu in Figure 63 on page 169 is displayed.
3. From the Module Configuration Menu, select Module Name and enter
the new name for the card. The name can be up to eight alphanumeric
characters. Spaces and special characters are not allowed.
4. To save your changes in the master configuration file, select Line
Card Configuration and Save Line Card Configuration.
Web Browser
To assign names to the AT-CM Line Cards from the web browser
windows:
1. Select Module Status & Configuration from the menu bar.
2. In the Chassis View, click a port on the line card you want to assign a
name. Alternatively, select the Menu View tab and click the name of
the line card. You can configure only one line card at a time.
3. Click the Setting tab, shown in Figure 70 on page 179.
4. Click the Edit button in the Module Name section of the window.
5. In the Module Name pop-up window, enter the new name for the card.
The name can be up to eight alphanumeric characters. Spaces and
special characters are not allowed.
6. Click the Update button.
7. To save your changes in the master configuration file, click the Line
Card Configuration tab, the Current Configuration tab, and the
Save Current Configuration button.