Allied Telesis AT-S102 - Manual (Page 273)

Converteon Management Software User’s Guide
273
Displaying OAM Statistics
Menus
To display OAM statistics for local OAM clients from the menus:
1. From the Main Menu, select Module Status and Configuration to
display the Module Status and Configuration Menu, shown in Figure 58
on page 158.
2. Select the line card whose OAM statistics you want to view. The
Module Configuration Menu is shown in Figure 63 on page 169.
3. Select Port A to display the Port Management Menu in Figure 64 on
page 170.
4. From the Port Management Menu, select OAM Configurations to
display the OAM Configuration Menu in Figure 105 on page 254.
5. From the OAM Configuration Menu, select Show OAM Statistics to
display the Show OAM Statistics window in Figure 116.
Figure 116. Show OAM Statistics Window
Refer to the IEEE 802.3ah standard for the definitions of the different
types of OAMPDUs.
Show OAM Statistics
Module 11, Port = A
Tx OAMPDUs 70917
Rx OAMPDUs 70918
Tx Information OAMPDUs 70917
Rx Information OAMPDUs 70918
Tx Event OAMPDUs 0
Rx Unique Event OAMPDUs 0
Rx Duplicate Event OAMPDUs 0
Tx Loopback Control OAMPDUs 0
Rx Loopback Control OAMPDUs 0
Tx Variable Request OAMPDUs 0
Rx Variable Request OAMPDUs 0
Tx Variable Response OAMPDUs 0
Rx Variable Response OAMPDUs 0
Tx Organizational Specific OAMPDUs 0
Rx Organizational Specific OAMPDUs 0
Rx Unsupported OAMPDUs 0
Return to OAM Configurations ...