Allied Telesis AT-S102 - Manual (Page 299)

Converteon Management Software User’s Guide
299
Read View Name The value that you configured with the View Name parameter
in the SNMPv3 View Table. A Read View Name allows the
users assigned to this Group Name to view the information
specified by the View Table entry. This value does not need to
be unique.
Write View Name The value that you configured with the View Name parameter
in the SNMPv3 View Table.
A Write View Name allows the users assigned to this Security
Group to write, or modify, the information in the specified View
Table. This value does not need to be unique.
Notify View Name The value that you configured with the View Name parameter
in the SNMPv3 View Table.
A Notify View Name allows the users assigned to this Group
Name to send traps permitted in the specified View. This value
does not need to be unique.
Storage Type The possible values are:
V-Volatile
This selection blocks the management card from saving the
entry in the master configuration file.
N-NonVolatile
This selection allows the management card to save the entry in
the master configuration file when a save command is issued.
Allied Telesis recommends this storage type.
Context Prefix This parameter appears only when you display the SNMPv3
Access Table and is set to null.
Context Match This parameter appears only when you display the SNMPv3
Access Table and is set to exact.
Row Status This parameter appears only when you display the SNMPv3
Access Table. The Active value indicates the entry takes effect
immediately.
Table 35. SNMPv3 Access Table Parameters
Parameter Description