Allied Telesis AT-S102 - Manual (Page 207)

Converteon Management Software User’s Guide
207
Displaying the Version Numbers of the Management Software
The procedures in this section are used to view the version numbers of the
management software programs for the local or remote AT-CM Media
Converter Line Cards and the AT-CV5M02 Management Card. You may
find this information useful if you obtain new versions of the programs and
want to ascertain which line cards need the new releases. Also, you might
be asked to provide this information if you contact Allied Telesis technical
support for assistance. The management software programs are listed
here:
ˆ The AT-CM2 and AT-CM70S Line Cards use the AT-S73 Management
Software
ˆ The AT-CM3 Line Cards use the AT-S102 Management Software
ˆ The AT-CV5M02 Management Card uses the AT-S99 Management
Software
Note
There is no management software program for the AT-CV Media
Converter Line Cards.
Menus
To view the information from the menus:
1. From the Main Menu, select Diagnostics. The Diagnostics Menu is
shown in Figure 53 on page 148.
2. To view the version numbers of the management software for the local
line cards, select Local CM Line Card Diagnostics to display the
menu in Figure 83 on page 199.
3. Select Image Version. An example of the Line Card Module Software
Image Version window is shown in Figure 85 on page 208. This
window is for viewing purposes only.