Allied Telesis AT-S102 - Manual (Page 257)

Converteon Management Software User’s Guide
257
6. To save your changes in the master configuration file, return to the
Module Configuration Menu and select Line Card Configuration and
Save Line Card Configuration.
Loopback
Support This parameter controls whether or not the OAM client
on the line card will participate in OAM loopback tests by
returning test packets received on port A from another
OAM client. This parameter applies only to OAM clients
that return the test packets and has no affect on OAM
clients that generate the test packets. For information on
this feature, refer to “Performing the OAM Loopback
Test” on page 259. The possible values are:
ˆ Yes – The OAM client can return test packets from
OAM loopback tests. This is the default setting.
ˆ No – The OAM client cannot return test packets.
Link Event
Support This parameter is not implemented in this release.
Variable
Retrieval
Support This parameter controls whether or not the OAM client
on the line card will respond to variable retrieval requests
from other OAM clients. A variable retrieval request is a
query of an OAM client by another OAM client for the
current value of a MIB object. The possible values are:
Yes - The OAM client will respond to variable retrieval
requests. This is the default setting.
No - The OAM client will not respond to variable retrieval
requests.
Note
The AT-CM Line Cards do not support any of the
MIB objects in the portion of the MIB tree that
variable retrieval requests can access. As a result,
the line cards will never return a MIB value in
response to a variable retrieval request from an
OAM client, such as another AT-CM Line Card.
Table 31. OAM Client Parameters
Parameter Description