Allied Telesis AT-S102 User Manual
Page 180
Chapter 6: Configuring the Media Converter Line Cards
180
5. In the Operation Mode pop-up window, select the new operating mode
for the line card from the pull-down menu. You can select only one
operating mode. The “Line Card DIP Switch Mode” selection activates
the DIP switches on the line card so that the operating mode is
controlled with the switches instead of the management software.
6. Click the Update button.
The management card automatically updates its master configuration
file with the new setting for the line card’s operating mode. Afterwards,
the Module Status and Configuration menu is displayed again.
The line card resets. When the operating mode is changed on an
AT-CM Line Card, the device has to initialize its management software
and configure its operating parameters before resuming normal
operations. In contrast, the AT-CV Line Cards immediately return to
normal operations because the cards in that series do not have
management software.