Configuring the snmpv3 group table, Figure 131. configure snmpv3 group table menu – Allied Telesis AT-S102 User Manual
Page 300
Chapter 10: Configuring SNMPv3
300
Configuring the SNMPv3 Group Table
This section contains a description of the SNMPv3 Group Table and how
to create, delete, and modify table entries. The SNMPv3 Group Table
allows you to associate a User Name with a Group Name. The User Name
is configured in the Configure SNMPv3 User Table menu while the Group
Name is configured in the Configure SNMPv3 Access Table menu. In
addition, the configuration in the Configure SNMPv3 Access Table menu
defines which MIB views this User can read, write (modify), and send traps
from. For each User Name, you can assign:
A Security Model (SNMPv1, SNMPv2c, SNMPv3)
A Group Name
A Storage Type
To access the SNBMPv3 Group Table from the menus:
From the Main Menu, select Configuration -> System Configuration
-> System Parameters Configuration - > SNMPv3 Configurations
-> Configure SNMPv3 Group Table. The Configure SNMPv3 Group
Table menu is shown in Figure 130.
Figure 130. Configure SNMPv3 Group Table Menu
To access the SNMPv3 Group Table from the web browser windows:
:Click the Configuration button in the menu bar and then select the
SNMPv3 tab and the Group Table tab. The tab is shown in
Figure 131.
Configure SNMPv3 Group Table
Converteon
Create SNMPv3 Table Entry
Delete SNMPv3 Table Entry
Modify SNMPv3 Table Entry
Display SNMPv3 Table Entry
Return to SNMPv3 Configurations ...