Allied Telesis AT-S102 - Manual (Page 54)

Chapter 2: AT-CM and AT-CV Media Converter Line Cards
54
Setting the
Operating Mode
There are two ways to set the operating modes on the AT-CM and AT-CV
Media Converter Line Cards. You can use the DIP switches on the line
cards or the management card. If you use the management card to set the
operating mode on a line card, the DIP switches are deactivated and
reactivating them requires the management card. For instructions on how
to set the operating modes of the line cards, refer to “Setting the Operating
Mode” on page 176.