Allied Telesis AT-S102 - Manual (Page 265)

Converteon Management Software User’s Guide
265
Figure 112. Show Local OAM Information Window
This window is for viewing purposes only. The items in the window are
defined in Table 32.
Show Local OAM Information
Module 4, Port A
Line Card Operation Mode OAM Visible Mode
Operation Status Operational
Mux State Forward
Parser State Forward
Local Discovering Yes
Local Stable No
Remote Discovering No
Remote Stable No
Critical Event No
Dying Gasp No
Link Fault No
OAM Version 0x01
Config Revision 0x0003
Vendor Information 0x00160001
Vendor OUI 00-30-84
Loopback State None
In Loopback Test No
Return to OAM Configurations ...
Table 32. Show Local OAM Information Window
Column Description
Line Card
Operation
Mode Displays the OAM operating mode of the line card. The
possible values are:
ˆ OAM Bypass Mode – In this mode the line card does
not process any OAMPDU packets it receives.
Rather, it handles them like normal network traffic
forwarding them onto the other port. This allows the
line card to be used in a network where the
Converteon chassis is not part of the IEEE802.3ah
end points. In this mode, the OAM function of the line
card is disabled. The module will pass all OAMPDUs
whose vendor OUI is not Allied Telesis.