Allied Telesis AT-S102 - Manual (Page 148)

Chapter 5: Configuring the AT-CV5M02 Management Card
148
Displaying the Operational Status of the Chassis
In this section are the procedures for displaying operational information
about the power supplies and fans in the chassis. The information also
includes information about the management card, including its MAC
address and the states of the flash memory and the Console port.
Note
These procedures do not perform any diagnostic utilities and are not
disruptive to the operations of the management card or the media
converter line cards in the chassis.
Menus
To view general information about the chassis from the menus:
1. From the Main Menu, select Diagnostics. The Diagnostics Menu is
shown in Figure 53.
Figure 53. Diagnostics Menu
2. From the Diagnostics Menu, select Chassis Diagnostics to display
the menu in Figure 54.
Figure 54. Chassis Diagnostics Menu
Diagnostics Menu
Converteon
Chassis Diagnostics
Local CM Line Card Diagnostics
Remote CM Line Card Diagnostics
Real-time IPC Message Analyzer
Return to Main Menu...
Chassis Diagnostics Menu
Converteon
Chassis Information
Reset Chassis and Restart All CV & CM Line Cards
Return to Diagnostics Menu...