Allied Telesis AT-S102 - Manual (Page 219)

Converteon Management Software User’s Guide
219
Table 26. Remote Module Status and Configuration Menu
Column Description
Unlabeled (Managed
Chassis Slot Numbers) This column lists the slots numbers in the managed chassis. You
use this column to determine the local line cards to which the remote
line cards are connected.
REMOTE MODULE
Mod_Name This column displays the names of the remote line cards.
CardTypeVer This column displays the model names of the remote line cards.
(Actually, this column displays the model names of the local line
cards. But since in most cases a local line card will be connected to
a remote line card of the same model, it’s easier to consider this
column as showing you the model names of the remote cards.)
VER This column displays the version numbers of the management
software on the remote line cards.
OperMod This column displays the operating modes of the remote line cards.
Since remote peer management requires an OAM mode, remote
line cards have to be set to one of these operating modes:
ˆ OV - OAM Visible (AT-CM2 and AT-CM70S Line Cards)
ˆ OAM_LT - Link Test with OAM (AT-CM3 Line Cards)
ˆ OAM_ML - MissingLink with OAM (AT-CM3 Line Cards)
ˆ OAM_SML - Smart MissingLink with OAM (AT-CM3 Line Cards)
ˆ LC_MGMT - The operating mode is controlled by the card’s DIP
switches. (All media converter line cards)
For background information, refer to “Operating Modes” on page 48.
FrmSz This column displays the maximum frame size of 10240 bytes
supported by the AT-CM301, AT-CM302 and AT-CM3K0S Line
Cards. This value is not adjustable.
This column will be blank for the AT-CM2, AT-CM70S, and AT-CV
Line Cards. Here are their maximum frame sizes:
ˆ The AT-CM2 Line Cards, except for the AT-CM2K0S Line Card,
and the AT-CM70S Line Card have a maximum frame size of
1522 bytes.
ˆ The AT-CM2K0S Line Card can have a maximum frame size of
either 1522 bytes or 1632 bytes.
ˆ The AT-CV Line Cards have a maximum frame size of 9000
bytes.