Allied Telesis AT-S102 - Manual (Page 330)

Chapter 11: Uploading and Downloading Files
330
To use the web browser windows to update the master and SNMPv3
configuration files:
1. Click the Configuration button in the menu bar.
2. If it isn’t selected, select the System tab.
3. Click the Edit button in the Configuration section of the window.
4. In the pop-up window, click the radio button for Save System
Configuration and click the Apply button. This command updates the
master configuration file and the SNMPv3 file with all of the current
settings on the management card.
5. Click the All CM Line Cards tab.
6. Click the Edit button in the Configuration section of the window.
7. In the pop-up window, click the radio button for Save All CM Line
Card Configurations and click the Apply button. This command
updates the master configuration file with all of the current settings on
the line cards.
For instructions on how to upload the files, refer to “Transferring the
Master Configuration File with the Web Browser Windows” on
page 334.
Transferring the
Master and
SNMPv3
Configuration
Files with the
Menus
There are two phases to uploading or downloading the configuration files
from the menus. In the first phase you configure the TFTP client. In the
second you perform the actual transfer.
Configuring the TFTP Client
To configure the TFTP client to upload or download the master or
SNMPv3 configuration file:
1. From the Main Menu, select Configuration to display the
Configuration Menu shown in Figure 26 on page 100.
2. From the Configuration Menu, select System Configuration to
display the menu in Figure 27 on page 100.
3. From the System Configuration Menu, select System Parameters
Configuration to display the menu in Figure 28 on page 101.