Allied Telesis AT-S102 - Manual (Page 298)

Chapter 10: Configuring SNMPv3
298
Security Model The possible values are:
Select one of the following SNMP protocols as the Security
Model for this Group Name.
1-v1
Select this value to associate the Group Name with the
SNMPv1 protocol.
2-v2c
Select this value to associate the Group Name with the
SNMPv2c protocol.
3-v3
Select this value to associate the Group Name with the
SNMPv3 protocol. The SNMPv3 protocol allows you to
configure the group to authenticate SNMPv3 entities (users)
and encrypt messages.
Security Level The possible values are:
A-AuthNoPriv
This option represents authentication, but no privacy protocol.
Select this security level if you want to authenticate SNMP
users, but you do not want to encrypt messages using a
privacy protocol.You can select this value if you configured the
Security Model parameter with the SNMPv3 protocol.
P-AuthPriv
This option represents authentication and the privacy protocol.
Select this security level to encrypt messages using a privacy
protocol and authenticate SNMP entities. This level provides
the greatest level of security. You can select this value if you
configured the Security Model parameter with the SNMPv3
protocol.
N-NoauthNoPriv
This option represents no authentication and no privacy
protocol. Select this security level if you do not want to
authenticate SNMP entities and you do not want to encrypt
messages using a privacy protocol. This security level provides
the least security.
Note
The only security level for SNMPv1 and SNMPv2c is N-
NoauthNoPriv.
Table 35. SNMPv3 Access Table Parameters
Parameter Description