Allied Telesis AT-S102 - Manual (Page 234)

Chapter 7: Configuring the Media Converter Line Cards with Remote Peer Management
234
Resetting the
Remote AT-CM3
Line Cards
This procedure is not supported on the AT-CM2 and AT-CM70S Line
Cards.
Caution
This procedure will disrupt the network operations of the line card.
Some network traffic may be lost.
To reset a remote AT-CM3 Line Card from the web browser windows:
1. Select Remote Module Status & Configuration from the menu bar to
display the Remote Module Status & Configuration tab.
2. Click the model name of the line card you want to reset.
1. Select the Setting tab.
2. Click the Reset Remote Line Card button at the bottom of the tab.
The line card resets.
3. Select Remote Module Status & Configuration from the menu bar
again.
4. To continue managing the line card, wait one to two minutes for the
card to initialize its management software and to negotiate the OAM
state with its local counterpart, and then select the card again from the
Remote Module Status & Configuration window.