Allied Telesis AT-S102 - Manual (Page 187)

Converteon Management Software User’s Guide
187
4. To activate the low power mode on the line card and turn off the LEDs,
select Configure Line Card to Low Power Mode (On). To disable the
low power mode and turn on the LEDs, select Configure Line Card to
Normal Mode (Off).
5. To save your changes in the master configuration file, return to the
Module Configuration Menu and select Line Card Configuration and
select Save Line Card Configuration.
Web Browser
To set the low power mode on the AT-CM3 Line Cards from the web
browser windows:
1. Select Module Status & Configuration from the menu bar.
2. In the Chassis View, click either port on the AT-CM3 Line Card you
want to configure. Alternatively, select the Menu View tab and click the
name of the line card. You can configure only one line card at a time.
3. Click the Setting tab, shown in Figure 70 on page 179.
4. Click the Edit button in the Low Power Mode section of the window.
5. To activate the low power mode and turn off the LEDs on the line card,
select On In the Low Power Mode pop-up window. To deactivate the
low power mode and turn on the LEDs, select Off.
6. Click the Update button.
7. To save your changes in the master configuration file, click the Line
Card Configuration tab, the Current Configuration tab, and the
Save Current Configuration button.