Allied Telesis AT-S102 - Manual (Page 335)

Converteon Management Software User’s Guide
335
4. To download the master configuration file to the management card
from a TFTP server:
a. In the Configuration File Download section, select the TFTP
Server IP Address field and enter the IP address of the TFTP
server on your network.
b. Select the Configuration File Name field and enter the filename of
the configuration file you want to download from the TFTP server.
The extension should be “.cfg”.
c. Click the Download button.
The download begins immediately. There is no confirmation
prompt. After receiving the master configuration file from the TFTP
server, the card writes the file to flash memory and resets.
Afterwards, it initializes its management software and configures its
parameters according to the settings in the downloaded
configuration file. To resume managing the card, you have to start
a new management session.
If the auto-copy settings for the chassis slots is activated in the
downloaded configuration file, the settings on the line cards may
change. This may disrupt network operations and may result in the
loss of network traffic. For further information, refer to
“Configuration Files” on page 32.