Allied Telesis AT-S102 - Manual (Page 205)

Converteon Management Software User’s Guide
205
Multiple The number of frames that were successfully
transmitted after they encountered more than one
collision. This counter applies only to half-duplex
mode.
Excessive The number of frames that were discarded after
they encountered 16 consecutive collisions. This
counter applies only to half-duplex mode.
Late The number of times that a collision was detected
late in the transmission of a frame. This counter
applies only to half-duplex mode.
OutFCSErr The number of egress frames with an invalid
FCS.
64 Octets The number of ingress and egress packets with a
length of 64 octets. This counter includes packets
with errors.
65 to 127 Octets The number of ingress and egress packets with a
length of 65 to 127 octets. This counter includes
packets with errors.
128 to 255 Octets The number of ingress and egress packets with a
length of 127 to 255 octets. This counter includes
packets with errors.
256 to 511 Octets The number of ingress and egress packets with a
length of 256 to 511 octets. This counter includes
packets with errors.
512 to 1023 Octets The number of ingress and egress packets with a
length of 512 to 1023 octets. This counter
includes packets with errors.
1024 to Max Octets The number of ingress and egress packets with a
length of 1024 octets up to the maximum
permitted by the line card. This counter includes
packets with errors.
Table 22. Port Statistics for the AT-CM3 Line Cards
Statistic Description