Allied Telesis AT-S102 - Manual (Page 301)

Converteon Management Software User’s Guide
301
Figure 131. SNMPv3 Group Table Tab
The parameters for SNMPv3 Group Table entries are defined in Table 36.
Table 36. SNMPv3 Group Table Parameters
Parameter Description
Security Name The Security Name that you want to associate with a group.
Enter a Security Name that you configured in “Configuring the
SNMPv3 User Table” on page 290.
Security Model The corresponding SNMP protocol of the User Name. The
possible values are:
1-v1
Select this value to associate the Group Name with the
SNMPv1 protocol.
2-v2c
Select this value to associate the Group Name with the
SNMPv2c protocol.
3-v3
Select this value to associate the Group Name with the
SNMPv3 protocol.